ＡＭＰタイマーコンタクト一覧表

ジュニアタイマー

ジュニアパワータイマー

マキシパワータイマー

マイクロタイマー I

Used in Micro Timer I housings that mate with PC board headers pre-loaded with 1.6 x 0.8 tabs.

マイクロ-タイマーII

標準パワータイマー

標準タイマー

Contacts fit tab 6.3 x 0.8mm, 5.8 x 0.8mm and 4.8 x 0.8mm

USCAR

Application Specification 114-13013 covers the requirements for application of 2.8mm terminal system (sealed and unsealed) for use in the automotive industry. The terminal system consists of a blade terminal and a receptacle terminal. Each terminal features an insulation barrel, wire barrel, and mating end. The serrations inside the wire barrel provide maximum contact and tensile strength after crimping. The orientation tabs prevent the terminal from being inserted into the connector upside-down. The terminal is held in the connector when the internal locking mechanism of the connector engages the locking surface of the terminal.

The sealed terminals are designed for severe environmental conditions and high temperature applications. Sealing is achieved by means of an individual wire seal. The terminals are available in a carrier strip for terminating with semi-automatic machines.